Advantages UN homologation for fluid and solid dangerous goods group I, II and III Easy handling with optimal construction Quick recovery of damaged containers Optimal drainable Cost saving - reusable Construction Body butt-welded Top/bottom seamed welded to the body Seam reinforced with rod iron Top with 2" and 3/4" bung Closure galvanized or in stainless steel Inside with mounted support ring Locking ring with 4 recessed hexagonal screws M12 x 60 Materials Stainless steel 1.4571/AISI/BS 351 (standard) or upon request 1.4435/AISI/BS 316 Support ring St 12.03 electroplated (standard) or in stainless steel 1.4435/AISI/BS 316 Stacking ring St 12.03 electroplated Seal: 0-ring of EPDM Locking ring St 12.03 electroplated Plug stainless steel 1.4571/AISI/BS 351 or galvanized, with PE-washer Surface treatment Stainless steel untreated Remarks Recovery in limited space problemless All operations can be handled by one person After use easy to clean reusable Homologation UN 1A2W/X450 S / X1.8-600 Drop test 2,7 meter Hydraulic test 600 jPa Leakage test 30 kPa (pneumatic) Stacking test 13,5 kN For solids maximum gross weight = 450 kg For liquids maximum density = 1,8 Quality management ISO 9001

For more Information

Back to M.O. Industries Front Page